Ultimate Detailing Kit

Enhance is the ultimate easy to use Nano-spray-sealant. Safe to use directly onto the surface i.e. all exterior surfaces (paintwork, glass, plastic, alloys) and car surrounds. Adds extra protection to existing wax and sealants for upto 4 months.

 

DIRECTIONS FOR USE

Onto a dry surface: simply spray directly onto the surface and spread with a soft cloth, then buff as required.

Onto wet surface: after washing the vehicle, while the surface is still wet, simply spray the product onto the wet surface then pressure wash off immediately. You can dry the vehicle using a drying towel or microfibre cloth, this is very important in hard water areas.

 

CAUTION

IMPORTANT Do not use on warm surfaces, in direct sunlight and do not allow to dry on the surface or marking may occur. DO NOT use on wrapped or matt surfaces.

Store in ambient temperatures above 6C and below 26C.

 

HEALTH AND SAFETY

Causes serious eye irritation, wash contaminated skin thoroughly after handling, wear protective gloves, protective clothing, eye protection and face protection. If in eyes rinse cautiously with water for several minutes, remove contact lenses if worn and continue rinsing, if eye irritation persists seek medical advice.

Cherry Burst contains a powerful blend of detergents and special additives which rapidly lifts oils, grease and road grime from vehicle surfaces whilst leaving a long lasting streak free shine on bodyworks and windows.

 

Directions

Ideally use a pre-wash or snow foam before shampooing to remove and lossen dirt. Pour 25-30ml of Cherry Burst into an empty bucket with a grit guard and add water to generate foam.

Use more product as reqiured to counteract dirtier vehicles and hard water.

Use a wash mitt to apply the diluted shampoo to the vehicle, ideally starting at the top of the vehicle.

Rinse off with clean water with a pressure washer or hose pipe, then dry with a microfiber drying towel.

 

CAUTION

Contains

Alcohols, C12-14, ethoxlated, sulphates, sodium salts, Alkyl, amid propyl Betaine, <5% amphoteric surfactants <5% perfumes.

 

HEALTH AND SAFETY

Causes skin irritation. Causes serious eye damage. Wash contaminated skin thoroughly after handling. Wear protective/gloves/clothing/eye protection/face protection. If on skin wash with plenty of water, if in eyes rinse cautiously with water for several minutes, remove contact lenses if present and continue rinsing. If skin irritaion occurs seek medical advice.

Dirty Wheels

Non-Acidic Alloy Wheel Cleaner

An alkaline based wheel cleaner which quickly breaks down dirt and accumulated brake dust on alloy and factory finished lacquered wheels. Provides excellent detergent and emulsification for soils contained in wheel grime.

 

Directions for use 

Spray or brush this product on to the wheels, and allow to soak for approximately 1-2 minutes. Agitate if necessary. Rinse thoroughly with clean water, ideally with a pressure washer. It may be necessary to repeat the application for stubborn stains.

 

CAUTION

COOL WHEELS BEFORE USE

 

Do not apply this product to wheels in direct sunlight.

Do not allow this product to dry out on the wheels as damage may occur.

Please note that this is a professional strength product and is only suitable for factory finished alloy wheels.

Do not use on chrome plated, powder coated, and magnesium alloy and anodized Wheels.

Avoid contact with surrounding plastics and paintwork as this may stain.

Remove any splashes immediately with a neutral detergent and rinse with water.

It is the user’s responsibility to determine suitability by testing compatibility on a small area prior to use. If in doubt please contact us for advice.

UN 1760

CORROSIVE LIQUID, N.O.S CONTAINS SODIUM HYDROXIDE.

Contains tetra sodium ethylene diamine tetracetate. Alkyl Amid propyl Betaine. Sodium Hydroxide, 2-Butoxyethanol, 5-<15%EDTA and salts thereof, <5% amphoteric surfactants,

 

HEALTH & SAFETY   

Causes severe skin burns and eye damage. Do not breathe vapor/spray.

Wash contaminated skin thoroughly after handling. Wear protective gloves/protective Clothing/ eye protection/face protection. If swallowed rinse mouth, do not induce vomiting. If on skin or hair take off contaminated clothing, rinse skin with water or shower. If inhaled remove person to fresh air and keep comfortable for breathing. If in eyes rinse cautiously with water for several minutes. Remove contact lenses and continue rinsing.Dispose of contents / container in accordance with national guidelines. Store locked up.

An excellent degreaser, suitable for cleaning painted surfaces, vinyl & plastics. Removes flies, traffic film, nicotine stains, oil stains and a superb manual upholstery and carpet cleaner.

 

Directions for use

Apply solution by low pressure spray, sponge or brush, leave to dwell, then rinse off. Do not allow to dry on any surface. Extra care must be taken in warmer temperatures. Always test on a small area prior to use.

 

CAUTION

UN1760 CORROSIVE LIQUID N.O.S CONTAINS SODIUM HYDROXIDE.

 

Contains

Alcohols C9-11, Ethoxylated, tetra sodium ethylene diamine tetra acetate, Alkyl amid  propyl betaine. 2-Butoxyethanol, Sodium Hydroxide, <5% amphoteric surfactants, <5% EDTA and salts thereof, <5% non-ionic surfactants, <5% perfumes. Contains Citral, Linalool, d-Limonene.

 

HEALTH AND SAFETY

Causes severe skin burns and eye damage, Do not breathe vapour/spray. Wash contaminated skin thoroughly after handling. Wear protective gloves/protective clothing/eye protection/face protection. If swallowed rinse mouth, do not induce vomitting. If on skin or hair rinse or shower with water. Take off contaminated clothing and wash. If inhaled remove person to fresh air and keep comfortable for breathing. If in eyes rinse cautiously with water several times, remove contact lenses and rinse. 

Store locked up. Dispose of contents/ containers in accordance with national regulations

A powerful cleaning agent for rapid drying leaving a smear free finish on glass

Application

Spray sparingly over the surface and spread with a soft cloth. Wipe off immediately with a soft clean cloth.

Storage

 

CAUTION

Store away from direct sunlight and sources of ignition, ensure adequate ventilation.

UN 1993

Flammable liquid, N.O.S contains Propan-2-01 Health& Safety

Flammable liquid and vapour, causes serious eye irritation, may cause drowsiness or

Dizziness. Take action to prevent static discharges. Avoid breathing vapour/spray Wash contaminated skin thoroughly after handling. Use only outdoors or in a well ventilated Area Wear protective gloves/ protective clothing/ eye protection/ face protection. fI on skin take off contaminated clothing and rinse skin with water or shower. If inhaled remove person to fresh air and keep comfortable for breathing. fI in eyes rinse cautiously with water for several minutes, remove contact lenses and rinse, fi eye irritation persists seek medical advice.

Keep container tightly closed and store in a locked space. Dispose of contents and container in accordance with national regulations.

Tyre Dressing 

Water Based, High Gloss & Silicone Free

A superior versatile tyre dressing formulated to restore a smooth original appearance to tyres and exterior trims. Tyre Dressing may also be used on hoses and other rubber and plastic components.

 

Directions

Apply using a clean lint-free cloth or a brush to leave a thin wet film. If required apply a second coat for a deeper gloss finish. Wipe off any excess of product to avoid tyre dressing sling.

 

CAUTION

 

NOT SUITABLE FOR MOTORBIKE TYRES, ONLY APPLY TO WALL OF TYRE.

 

HEALTH & SAFETY

Not classified. Safety data sheet available for professional user on request.